How to Make a DIY Weed Stash Box | Materials and Steps

How to make a DIY weed stash box

A DIY weed stash box is a container that blocks light, seals air, and limits access. A mason jar inside a wooden box works. A lockable metal box with a gasket works. The box must keep cannabis dry and away from heat. It must also keep children and pets out.

Odor Proof Stash Box Reviews: One Pick, Four Options

Materials

• Wooden box with a lid, 8 by 6 by 4 inches or larger
• Airtight glass jar with a metal lid, 4 to 16 ounces
• Closed-cell foam sheet, 1/4 inch thick
• Two hinges and a hasp
• Combination padlock or keyed lock
• Two-way humidity pack, 58% or 62% relative humidity
• Label tape and a marker

Steps

1. Measure the jar. Cut foam to line the bottom and sides of the box.
2. Glue foam to the box interior. Leave 1/8 inch clearance for the lid.
3. Place the jar in the foam cutout. The jar must not move when the box shakes.
4. Install the hasp and lock. Drill pilot holes for screws.
5. Add a humidity pack to the jar. Do not put the pack in direct contact with flower.
6. Label the box with contents and date. Store the box in a dark cabinet at 60 to 70 F.

Storage conditions

Cannabis flower loses potency with light, heat, and air. Store flower in an airtight container at 60 to 70 F. Keep relative humidity near 58 to 62%. A humidity pack controls moisture. Mold grows above 65% relative humidity. Dry flower crumbles below 55%. Keep the box out of sunlight. Do not store flower in a plastic bag for long periods.

Luxury Cannabis Stash Box: Ultimate Guide for the Connoisseur

Safety

Child-resistant packaging is a legal requirement for cannabis products in many US states. A lock adds a second barrier. Keep the box on a shelf above child reach. Store edibles in a separate locked box. Label all containers. Do not store cannabis near medication or alcohol.

cannabis stash box ideas